概述：

X射線分選機的分選過程是物料經由輸送帶運送，在輸送帶上方的X射線發生器與下方的一組線陣雙能探測器之間通過，此時確定經過的每塊物料的X射線能量吸收程度，測量出其物質的原子序數，控制單元在接收到測量信號后進行分析和篩選，觸發固定在輸送帶頭部的噴吹執行機構將物料吹出。

產品優勢：

· X射線穿透+AI智能融合技術，滿足不同的工況要求，分選率99%以上。

· 160kev X射線發生器，功率500W/800W/1200W可選，用于實現物料最高穿透效果。

· 線陣式雙能探測器，點距0.6/1.6可選，用于實現物料最高成像效果。

· 自主開發的學習算法，軟件程序數據隨時監控，時刻保持最優穩定性。

應用范圍：

1、混合鋁料中的重金屬剔除：選出鐵、銅、鋅、鉛、不銹鋼、鋁包鐵、鋁包鋅等。

2、重金屬的進一步篩選、分離、除雜、提純。黃銅紫銅的分離。

3、再生塑料的分選：從混合塑料中清楚含溴和含氯阻燃劑的塑料。

4、礦石的分選：如煤矸石、錳礦石、鎢礦石、鐵礦石的破碎預分選。

Overview

The sorting process of the X-ray sorting machine is that the material is transported via a conveyor belt, passing between the X-ray generator above the belt and a set of line array dual energy detectors below, at which point the degree of X-ray energy absorption of each piece of material passing through is determined and the atomic number of the material is measured, the control unit receives the measurement signal for analysis and screening, triggering a spray actuator fixed to the head of the conveyor belt to blow the material out. The control unit, after receiving the measurement signal, analyses and screens the material, triggering the blowing actuator fixed at the head of the conveyor belt to blow it out.

Product Advantages

- X-ray+ AI intelligent integration technology to meet the requirements of different working conditions, with a sorting rate of over 99%.

- 160kev X-ray generator with 500W/800W/1200W option for maximum material penetration.

- Linear dual-energy detector with optional 0.6/1.6 point distance for maximum material imaging.

- Self-developed learning algorithm, software programme data monitored at all times for optimum stability at all times.

Applications

1、Heavy metal rejection in mixed aluminum materials: selection of iron, copper, zinc, lead, stainless steel, aluminum clad iron, aluminum clad zinc, etc.

2、Further screening, separation, de-hybridisation and purification of heavy metals. Separation of brass and purple copper.

3、Sorting of recycled plastics: clearing plastics containing bromine and chlorine flame retardants from mixed plastics.

4、Sorting of ores: such as coal gangue, manganese ore, tungsten ore, iron ore crushing pre-sorting.

產品參數：

Product Parameters

注：不同物料的分選及處理量有差異，獲取準確技術參數請來電咨詢，以上技術參數僅供參考!

Note: The sorting and processing capacity of different materials varies. Please call us for accurate technical parameters and the above technical parameters are for reference only!